China Renewable Design for Polycarboxyalte based superplasticizer for concrete - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli Manufacture and Factory

Renewable Design for Polycarboxyalte based superplasticizer for concrete - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Water Reducing Concrete Admixture, Sodium Naphthalene Sulfonate Formaldehyde, Pce For Concrete, We always stick to the principle of "Integrity, Efficiency, Innovation and Win-Win business". Welcome to visit our website and do not hesitate to communicate with us. Are you ready? ? ? Let us go!!!

Renewable Design for Polycarboxyalte based superplasticizer for concrete - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli Detail:

Appearance	Colorless to yellowish or brown viscous liquid
Bulk density(kg/m³,20℃)	1.107
Solid content(liquid)(%)	40%，50%，55%
PH value(20degree)	6+/-1
Alkali Content(%)	≤0.0003%
Sodium Sulfate Content	0.04
Water Reducing Rate	≥25%
Air Content	≤2.8%
CL- Content	0.02%

No.	Inspection Items	Unit	Standard Value	Test Results
1	1h After Fluidity of Cement Paste	mm	≥220	240
2	Water Reducing Rate	%	≥30	36
3	Atmospheric Pressure Bleeding Rate	%	≤60	21
4	The Difference Between the Setting Time	min	Initial -90~+120	-90~+120
4	The Difference Between the Setting Time	min	Final -90~+120	-90~+120
5	Slump Variation Retention	30min	≥180	240
5	Slump Variation Retention	60min	≥180	230
6	Ratio of Compressive Strengh	2d	≥130%
		7d	≥125%
		28d	≥120%
7	Effect on Reinforcement Corrosion	/	No Corroding	No Corroding
8	Ratio of Shrinkage	/	≤110	103
Tested by Shanlv P.O.42.5 standard portland cement, with the dosage of 0.35% of CL-ES-50

CL-ES-50 can be widely used in all kinds of precast concrete,prefabricated products,early strength and high early-strength concrete.

1. Recommended dosage ( by binding materials’ weight) is 0.35%-0.55% (on the base of 50% solid content). The optimum dosage is according to the real project conditions and actual materials.

2. Compatibility test should be done in advance when used with other additives.

3. Precise measurement avoids repeat dosage and errors.

Packaging: 200kgs/drum 1000L/IBC tank 23tons/flexitank

Storage: to be stored in plastic or stainless steel container,please store dry at usual ambient temperature and protect from excessive heat(below 40℃)

Shelflife: 1year

Transport regulation: not handle with care to avoide breakage when moving,keep from excessive heat.this product is non-toxic,non-irritating,non-combustible.

Product detail pictures:

Related Product Guide:

The corporation keeps to the operation concept "scientific management, superior quality and performance primacy, consumer supreme for Renewable Design for Polycarboxyalte based superplasticizer for concrete - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli , The product will supply to all over the world, such as: Iran, Kuala Lumpur, Munich, Wide selection and fast delivery to suit your needs! Our philosophy: Good quality, great service, keep improving. We've been looking forward that more and more oversea friends join in our family for further development near the future!

Concrete additive

Concrete Polymer Additive

Concrete Water Reducer

High range concrete admixture

Pce Superplasticizer

Polycarboxylate Super Plasticizer

Polycarboxylate Superplasticizer

Polycarboxylic Acid

Readymix concrete admixture

Slump Retention Concrete Admixture

Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!